INNOTECPRO GPS Tracker

User Guide

Tracking platform: www.365gps.com
Android application: GPS365
iOS application: GPS365
Login ID: IMEI number (15digits)
Default password: 123456

1. Preparation before use

1. Prepare a nano sim card which compatible 2G GSM network, if a new SIM card, need 24 hours to activate properly; also need to set off the PIN code of the sim card.
2. Open GPRS and Caller ID Display service of the sim card.
3. Scan QR code on first page to download GPS365 APP

2. Power on

Insert the nano sim card into the tracker’s sim card slot ( there is a missing angle alignment for sim card and the slot), powerbutton is the black button next to sim card slot.

Power On: long press for 3 seconds
SOS: long press for 3 seconds in power on mode
Power off: long press for 10seconds (with sim card)
Power off: long press for 3seconds (without sim card)

3. Account Login

There is a sticker with every device, 15digits numbers — it’s the IMEI number, just the Login ID. Open 365GPS APP:

Login ID: IMEI number ( 15digits )

You can also dial *#06# on your phone and it will show you your IMEI number.

Password: 123456

4. Track

5. Voice monitor

6. Voice recorder

7. LED lights

Red: Battery, slow normal, fast low battery, bright on charging
Yellow: GSM, slow normal, fast search signal, bright no sim
Blue: GPS, slow normal, fast search, bright get GPS no sim

 8. SMS commands

 000 # number # number # number # (binding three phone )
111 (TF Card Voice Recording 10 minutes pause )
222 (TF Card Voice Recording 10 minutes pause, auto
recording 10minutes again if any voice )
333 (voice-activated dial-back call to binding numbers )
444 (delete all contents of memory)
555 (turn off all features)
666 (vibration alarm SMS to binding number)
777 (vibration alarm call to binding numbers)
888 (play the memory recording — this require a speaker )
999 ( SMS Coordinate Positioning ) 

9. SMS operation

9.1 Inquire IMEI No.: “imei#”
9.2 Restore default password: “pwrst”
9.3 Restore to the factory settings: “1122”
9.4 Set Upload interval: “time#minute”(minute range 1-
120minute)；“md#second”(second range 10-60seconds)
9.5 Open/Close LED: “LED#on , LED#off”
9.6 APN settings: “APN#parameter#account#password#”
9.7 Remote Restart: “sysrst”
9.8 Vibration Alarm: “6666#on# / 6666#off#”
9.9 Modify IP address: “domain # IP # Port ID #”
9.10 Heartbeat Packet Time: heartbeat#No.#(no.=second)

Legal Notice: This product development is only used for personal, company, and transportation fleet safety guards.
Please comply with national laws and regulation of the country.